|
We supply to you a braider head that has undergone the following steps:
Completely disassemble, clean, paint, and refill head with new Wardwell oil. Install new driver bearing shaft and oil-lite bushing in driver bearing if wear is present. Install new drive clutch. Install new upper carriers, driver bars, and
assemble with new pawls, pawl pins, supply rachets, holder sleeves, carrier stops, springs, and supply caps. Straighten lower carriers, re-assemble with new
supply rachets, holder sleeves, carrier spindle, pawl spring, spool bearing and safety pin. Safety bore of carrier checked for tolerance and bushed with oil-lite
bronze if wear is present. Inspect brake levers and wire deflectors, reforming to original bend or replacing. Highly polish all wire contact points.
|
